1 Hoe te identifisearjen ISO 6162-1 en ISO 6162-2 flange haven
Sjoch tabel 1 en figuer 1, ferlykje de kaai ôfmjittings foar identifisearje ISO 6162-1 (SAE J518-1 CODE 61) haven of ISO 6162-2 (SAE J518-2 CODE 62) haven.
Tabel 1 Flange haven ôfmjittings
| Flange grutte | Flange haven ôfmjittings | ||||||||
| ISO 6162-1 (SAE J518-1 CODE 61) | ISO 6162-2 (SAE J518-2 CODE 62) | ||||||||
| Metrysk | Dash | l7 | l10 | d3 | l7 | l10 | d3 | ||
| Metryske skroef | Inch skroef | Metryske skroef | Inch skroef | ||||||
| 13 | -8 | 38.1 | 17.5 | M8 | 5/16-18 | 40,5 | 18.2 | M8 | 5/16-18 |
| 19 | -12 | 47,6 | 22.2 | M10 | 3/8-16 | 50,8 | 23.8 | M10 | 3/8-16 |
| 25 | -16 | 52.4 | 26.2 | M10 | 3/8-16 | 57.2 | 27.8 | M12 | 7/16-14 |
| 32 | -20 | 58.7 | 30.2 | M10 | 7/16-14 | 66,7 | 31.8 | M12 | 1/2-13 |
| 38 | -24 | 69,9 | 35.7 | M12 | 1/2-13 | 79.4 | 36,5 | M16 | 5/8-11 |
| 51 | -32 | 77,8 | 42.9 | M12 | 1/2-13 | 96,8 | 44,5 | M20 | 3/4-10 |
| 64 | -40 | 88,9 | 50,8 | M12 | 1/2-13 | 123.8 | 58.7 | M24 | - |
| 76 | -48 | 106 | 61.9 | M16 | 5/8-11 | 152.4 | 71.4 | M30 | - |
| 89 | -56 | 121 | 69,9 | M16 | 5/8-11 | - | - | - | - |
| 102 | -64 | 130 | 77,8 | M16 | 5/8-11 | - | - | - | - |
| 127 | -80 | 152 | 92.1 | M16 | 5/8-11 | - | - | - | - |
figuer 1 Port diminsje foar flange ferbinings
Ut tabel 1, Dash-8 en -12 maten, it is deselde skroef ôfmjittings en nau l7 en l10 foar ISO 6162-1 en ISO 6162-2, dus moatte ynspektearje de l7 en l10 ôfmjittings foarsichtich, en mjitten mei in krektens fan 1 mm of minder.
2 Hoe identifisearje ISO 6162-1 en ISO 6162-2 flange clamp
Sjoch tabel 2 en figuer 2, figuer 3, ferlykje de kaai ôfmjittings foar identifisearje ISO 6162-1 (SAE J518-1 CODE 61) flange clamp of ISO 6162-2 (SAE J518-2 CODE 62) flange clamp.
As it is split flange clamp, ynspektearje en ferlykje l7, l12 en d6 dimensions.
As it is ien-stik flange clamp, ynspektearje en ferlykje l7, l10 en d6 dimensions.
Tabel 2 Flange clamp ôfmjittings
| Flange grutte | Ofmjittings fan de flensklem (mm) | ||||||||
| ISO 6162-1 (SAE J518-1 CODE 61) | ISO 6162-2 (SAE J518-2 CODE 62) | ||||||||
| Metrysk | Dash | l7 | l10 | l12 | d6 | l7 | l10 | l12 | d6 |
| 13 | -8 | 38.1 | 17.5 | 7.9 | 8.9 | 40,5 | 18.2 | 8.1 | 8.9 |
| 19 | -12 | 47,6 | 22.2 | 10.2 | 10.6 | 50,8 | 23.8 | 10.9 | 10.6 |
| 25 | -16 | 52.4 | 26.2 | 12.2 | 10.6 | 57.2 | 27.8 | 13.0 | 13.3 b |
| 32 | -20 | 58.7 | 30.2 | 14.2 | 10,6 a | 66,7 | 31.8 | 15.0 | 13.3 |
| 38 | -24 | 69,9 | 35.7 | 17.0 | 13.3 | 79.4 | 36,5 | 17.3 | 16.7 |
| 51 | -32 | 77,8 | 42.9 | 20.6 | 13.5 | 96,8 | 44,5 | 21.3 | 20.6 |
| 64 | -40 | 88,9 | 50,8 | 24.4 | 13.5 | 123.8 | 58.7 | 28.4 | 25 |
| 76 | -48 | 106.4 | 61.9 | 30.0 | 16.7 | 152.4 | 71.4 | 34.7 | 31 |
| 89 | -56 | 120,7 | 69,9 | 34.0 | 16.7 | - | - | - | - |
| 102 | -64 | 130,2 | 77,8 | 37.8 | 16.7 | - | - | - | - |
| 127 | -80 | 152.4 | 92.1 | 45.2 | 16.7 | - | - | - | - |
| a, 10,6 foar metryske screw, en 12,0 foar inch screw | |||||||||
figuer 2 Split flange clamp
figuer 3 Ien-stik flange clamp
3 Hoe te identifisearjen flange holle
Ut tabel 3 en figuer 4, ferlykje de kaai ôfmjittings foar identifisearje ISO 6162-1 (SAE J518-1 CODE 61) flangekop of ISO 6162-2 (SAE J518-2 CODE 62) flangekop.
En as der in identifikaasje Groove leit op 'e omtrek fan' e flange skiif, sjoch figuer 4 blau markearre, it is ISO 6162-2 flange holle.(dit mark is earder opsjoneel, dus net alle ISO 6162-2 flenskoppen hawwe dit mark)
Tabel 3 Flange holle ôfmjittings
| Flange grutte | Ofmjittings fan flenskop (mm) | ||||
| ISO 6162-1 (SAE J518-1 CODE 61) | ISO 6162-2 (SAE J518-2 CODE 62) | ||||
| Metrysk | Dash | d10 | L14 | d10 | L14 |
| 13 | -8 | 30.2 | 6.8 | 31.75 | 7.8 |
| 19 | -12 | 38.1 | 6.8 | 41.3 | 8.8 |
| 25 | -16 | 44.45 | 8 | 47.65 | 9.5 |
| 32 | -20 | 50,8 | 8 | 54 | 10.3 |
| 38 | -24 | 60.35 | 8 | 63,5 | 12.6 |
| 51 | -32 | 71.4 | 9.6 | 79.4 | 12.6 |
| 64 | -40 | 84.1 | 9.6 | 107.7 | 20.5 |
| 76 | -48 | 101.6 | 9.6 | 131,7 | 26 |
| 89 | -56 | 114.3 | 11.3 | - | - |
| 102 | -64 | 127 | 11.3 | - | - |
| 127 | -80 | 152.4 | 11.3 | - | - |
figuer 4 Flange kop
Post tiid: Jan-20-2022